Bosch PR10E Instrucciones De Funcionamiento Y Seguridad página 9

BM 2609140306 09-05
INSTALLING THE MOTOR
INTO BASE
1. Open the clamping lever (Fig. 7).
2. Align the double triangles on the base and
motor then insert motor into base until it
stops (Fig. 7).
3. Turn motor clockwise until single triangle
lines up with "unlocked" symbol. (Make
sure that the indication the base is aligned
with the line under the "unlocked" symbol
on the motor. Otherwise, the router can be
damaged.) (Fig. 8)
4. Move motor
approximate desired depth has been
reached. (Fig. 8)
5. Turn motor clockwise about 1/4" until
single triangle lines up with "locked"
symbol. (Fig. 9)
6. Close the clamping lever. Always make
sure the motor sits tightly in the base. (The
tension of the clamping lever can be
changed by re-adjusting the nut.) (Fig. 9)
FIG. 8
3
10/5/05 8:12 AM
into base until the
4
Page 9
FIG. 7
2
FIG. 9
5
6
-9-
1