Publicidad
Setting
Spool
Pins
The spool pins are used for holding the spool of thread in order
to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.
(_ Needle thread (Top thread)
(_ Hole
(_) Tangle
NOTE:
When using thread which has tendency to tangle around spool
pin, thread through thte hole of spool pin as shown.
The hole should face the thread spool.
\
lll III_
\
Presser
Foot
Lifter
Presser foot lifter
_) Normal up position
(_) Highest position
The presser foot lifter raises and lowers your presser foot.
You can raise it about 1/4" (0.6 cm) higher than the
normal up position for easy removal of the presser foot
or to help you place heavy fabric under the foot.
Thread
Cutter
Thread cutter
You do not need a pair of scissors to cut threads after sewing.
Just use the built-in thread cutter.
Accessory
Box
Sewing accessories are conveniently located in the box.
16
Publicidad
