SICK W16 MultiPulse Instrucciones De Uso página 23

7.3 Setting
8 Troubleshooting
8027562/2022-02-28 | SICK
Subject to change without notice
Check the function as described in
behave as described in see table 11, page
WTS16P-xxxxxx2
The sensing range is adjusted by pressing the teach-in button (approx. 1-3 sec.).
Depending on the requirements, the potentiometer can be used for fine-tuning (without
pressing the teach-in button).
Clockwise rotation: Sensing range increased.
Counterclockwise rotation: Sensing range reduced.
The sensing range can also be adjusted using just the potentiometer.
1
1...3 sec.
2
3
Figure 14: WTB4F, adjustment of the sensing range using a teach-turn adjustment
WTS16P-xxxxxx0
Sensor with preset sensing range.
The sensor is adjusted and ready for operation.
NOTE
Do not operate the teach-in button using sharp objects.
The sensing range can be adjusted via IO-Link. Please refer to the enclosed "IO-Link
photoelectric sensors" operating instructions for information.
The Troubleshooting table indicates measures to be taken if the sensor stops working.
see table 11, page 20. If the digital output fails to
20, check the application conditions.
O P E R A T I N G I N S T R U C T I O N S | W16 MultiPulse
7
COMMISSIONING
23
en