Publicidad
Idiomas disponibles
Idiomas disponibles
2. Locate the corresponding plug located behind the
seat.
3. Ensure that the connectors align correctly before
connecting the two plugs together.
4. Use the 6 rubber straps in the bag to secure the
taillight cable along the rear of the brush guards,
with 3 rubber straps on each side.
3.7
INSTALL THE SAFETY NET
1. Secure the safety net looping the eleven ends
around the guard.
2. Pull the ends through both sides of the buckle
securing it into place.
English (Original Instructions)
3.8
INSTALL THE DUST COVERS
1. Mount the two smaller dust covers over the front
bumper screws.
2. Mount the two larger dust covers over the front
wheel hub caps.
4
OPERATION
This section describes how to operate the product.
CAREFULLY READ AND UNDERSTAND
THE SAFETY CHAPTER AND OPERATION
INSTRUCTIONS BEFORE YOU OPERATE THE
PRODUCT.
4.1
BEFORE DRIVING
4.1.1 PRE-DRIVE CHECKLIST
Make sure to check the condition of the product before
each drive.
11
WARNING
EN
Publicidad
