Publicidad
Idiomas disponibles
Idiomas disponibles
4. Close and lock the battery compartment lid.
4.1.7 ADJUST THE SEAT
WARNING
FAILURE TO HAVE THE SEAT LOCKED IN
POSITION COULD BE HAZARDOUS. THE SEAT
COMING LOOSE COULD CAUSE THE OPERATOR
TO LOSE CONTROL. NEVER OPERATE THE
PRODUCT WITHOUT THE SEAT SECURELY
LOCKED IN PLACE.
1. Pull up the seat lever to move the seat forward or
backward. Set seat location according to the shape
of the driver.
English (Original Instructions)
4.1.8 ADJUST AND FASTEN THE SEAT
BELTS
Driving this product without properly fastened seat
belts for the operator and passengers may increase
the chance of injury or death in the event of an
accident. Never operate or allow a passenger to drive
this product without properly fastening the seat belt.
Note: If there is no passenger in the passenger seat,
make sure the seat belt on the passenger seat is locked
together and secured.
1. Sit on the seat with your back against the backrest.
2. Place the two vertical straps over your shoulders,
making sure both sides rest across your chest, and
position the horizontal belt above your waist. Adjust
the length of the straps if necessary.
•
To tighten, pull the excess strap length through
the adjusters until they fit snugly.
•
To loosen, push the adjusters upward, releasing
some of the strap lengths until they fit snugly.
3. Insert the latch plate into the seatbelt buckle,
making sure it is fastened correctly.
13
WARNING
EN
Publicidad
