Publicidad
Idiomas disponibles
Idiomas disponibles
2. Decelerate by taking foot off of accelerator (right)
and lightly pressing the brake pedal (left).
Note: Do not pump the brake pedal to decelerate.
3. Steer the product right and left by slightly turning the
steering wheel clockwise or counterclockwise.
4. Reverse by first stopping the product, then setting
the gear shift switch to the "R" position. Then lightly
press the accelerator pedal to reverse.
4.6
DRIVE UPHILL/DOWNHILL
WARNING
The maximum slope should not exceed 12°.
English (Original Instructions)
Uphill
1. Before driving uphill, assess the terrain for
steepness, loose or slippery areas, and obstacles.
2. Maintain a consistent speed while driving uphill.
3. Reduce speed once you reach the top of the slope.
If the product cannot reach the top of the slope:
•
Avoid turning the product around while driving,
as this may cause it to roll over.
•
Slowly reverse the product while using the
brakes.
To prevent the product from flipping over, avoid driving
it downhill on sharp angles.
Downhill
1. Before driving downhill, assess the terrain for
steepness, loose, or slippery areas, and obstacles.
2. Go straight down the hill. Avoid sharp turns or
sudden movements that could cause loss of control.
3. Use the brakes to control your speed. Press the
brake intermittently to avoid brake overheating.
4.7
STOP THE PRODUCT
1. Slightly press the brake pedal until product has
completely come to a stop.
2. Set the gear shift switch to the "N" position.
15
WARNING
EN
Publicidad
