Publicidad
Minimum
Minimum
Minimum
Function
ml
Function
ml
Function
ml
quantity
quantity
quantity
2. If you want to prepare a drink according to your personal water volume choice, select the
maximum level setting (3 LEDs on).
*NOTE: The water volume can be modified by the user (see section 3.3 "Customization of water
quantity adjustment").
3. Once the strength and volume of water is confirmed, touch the espresso coffee icon (b) to
confirm the selection. Coffee preparation will start.
4. During preparation, indicator of the icon (b) will flash.
5. Touch the espresso coffee icon (b) to stop preparation at any time. The icons will turn off until
the coffee maker is ready again.
6. Once preparation process has finished, all the indicators of the icons will light up permanently.
Wait until coffee stops flowing from the nozzles before removing the cups. Note: the coffee
maker will store the last settings of coffee strength and water volume. Note: During the first
selections, the drink may not be dispensed through the nozzles. This is because the coffee
maker is making an initial adjustment so that you get the best quality in your coffee.
4.2 Preparing coffee (Lungo)
Follow the same steps as for the preparation of an espresso coffee but instead of pressing
the espresso icon (b) press the lungo coffee icon (c):
4.3 Preparing hot water for drinks
1. Place a cup underneath the steam/hot water outlet nozzle (3).
2. Touch the Power icon (a) to switch the coffee maker on. Wait until automatic rinsing
process is finished.
3. Touch the hot water icon (e). Indicator will light up.
4. Touch the icon (g) to select the water volume per cup.
5. Tap the hot water icon (e) again to confirm the selection. Water preparation will start.
6. During preparation, indicator of the icon (e) will flash.
7. Touch the icon (e) to stop preparation at any time.
8. Once preparation process has finished, all the indicators of the icons will light up permanently.
59
Publicidad
