Brother 888-X73 Manual De Instrucciones página 36

USING ATTACHMENTS AND APPLICATIONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
5
USING ATTACHMENTS AND
APPLICATIONS
CAUTION
Always turn off the machine before replacing the presser foot. Otherwise, injuries may occur
●
if the foot controller is accidentally pressed and the machine starts sewing.
Zipper insertion
Stitch Name Pattern
Straight Stitch
6
(Center Needle
Position)
You can use the zipper foot "I" to sew different types of
zippers, and can easily position it to the right or left side
of the needle.
When sewing with the zipper on the right side, attach
the shank to the left pin of the zipper foot. When sewing
with the zipper on the left side, attach the shank to the
right pin of the zipper foot.
1
2
1 Right pin for sewing with the zipper on the left
side
2 Left pin for sewing with the zipper on the right
side
3 Needle drop point for sewing with the zipper
on the left side
4 Needle drop point for sewing with the zipper
on the right side
Prepare the fabric with the zipper basted
1
on the wrong side.
1
3
2
4
1 Basting stitching
2 Reverse stitches
3 Wrong side of fabric
4 End of zipper opening
5 Zipper
35
Stitch
Length Foot
[mm (inch)]
Zipper
3 (1/8)
Foot "I"
3
4
1
3
5
4
Turn off the machine.
2
Attach the zipper foot "I".
CAUTION
Turn the handwheel toward you
●
(counterclockwise) and check that the
needle does not touch the zipper foot
before you start sewing. Choosing a
different stitch will cause the needle to
hit the presser foot and break, and you
may be injured.
Turn on the machine.
3
CAUTION
Do not turn on the machine while pressing
●
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
With the right side of the fabric facing up,
4
continue sewing with the zipper on the
right side of the presser foot.
1 End of zipper opening
2 Basting stitching
3 Zipper
• Sew the stitching in order, from 1 to 3.