Publicidad
Idiomas disponibles
Idiomas disponibles
USING ATTACHMENTS AND APPLICATIONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Using the blind stitch foot
Stitch Name
Pattern
2
Zigzag Stitch
3
Zigzag Stitch
4
Zigzag Stitch
6
Straight Stitch
(Center Needle
Position)
8
Blind Hem
Stitch
10
Stretch Blind
Hem Stitch
This foot comes in handy not only for stretch blind hem
stitching, but also for sewing fabric edges and seams.
■ When edge stitching
Turn off the machine.
1
Attach the blind stitch foot.
2
Turn on the machine.
CAUTION
Do not turn on the machine while pressing
●
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
Position the needle the distance you want
3
the stitch to be from the edge of the fabric,
and then lower the needle in that position.
Turn the foot guide screw and carefully
4
adjust to guide the fabric.
1
2
1 Screw
2 Guide
39
Stitch
Stitch Width
Length
[mm (inch)]
[mm (inch)]
0.7 (1/32)
1.8 (1/8)
1.5 (1/16)
3.3 (3/16)
2 (1/16)
5 (3/16)
3 (1/8)
—
2 (1/16)
5 (3/16)
2 (1/16)
5 (3/16)
2
1
■ When sewing seams
Turn off the machine.
1
Attach the blind stitch foot.
2
Turn on the machine.
CAUTION
Do not turn on the machine while
●
pressing down the foot controller. The
machine may start unexpectedly and
cause personal injury or damage to the
machine.
Set the pattern selection dial to the
3
Straight Stitch (Center Needle Position).
Align the foot guide with the needle
position.
Set the pattern selection dial to the Zigzag
4
Stitch with the desired width.
Place the fabric under the foot so the foot
5
guide is aligned between both edges of the
fabric.
Lower the presser foot and start sewing.
6
■ When stretch blind hem stitching
When stretch blind hem stitching using the blind
stitch foot, turn the screw to adjust the guide to the
folded hem.
• For more details on blind hem stitching, see
page 30.
1 Screw
2 Guide
3 Folded hem
1
2
3
Publicidad
