Publicidad
Idiomas disponibles
Idiomas disponibles
EXISTING CONSTRUCTION (BELOW CEILING APPLICATION) INSTALLATION INSTRUCTIONS
3. Connect the wiring according to the wiring
diagram.
a. Connect the black wire from the fan to the
black wire from the fan wall switch
with two-
port quick connect (FF).
b. Connect the black wire from the light to the
black wire from the light switch
with two-port
quick connect (FF).
c. Connect the white wire from the fan to the
white wire from the light and connect to the
line in from the ceiling
with three-port quick
connect (GG).
d. Connect the ground/green wire from the unit
to the ground bare wire in the ceiling with two
quick connector (FF) .
e. Use the wire housing screw (EE) to screw the
wire housing cover (B).
Note: For single wall switch applications, remove
and cut the clear 2 port connectors from
the 2 black wires coming from the bath
fan chassis. Strip 1/2 in. of insulation
from the wire ends and connect both
black wires to the single black wire
coming from the ceiling/switch.
Hardware Used
e
Wire Housing Screw
X
1
4.
Strip 1/2 in. of insulation from wire ends. Grip the wire
firmly and push the stripped end of the wire into the
open port of two-port quick connect (FF) or three-port
quick connect (GG). Use only one stripped end of the
wire per port. Verify the stripped end of the wire is
fully inserted to the back of two-port quick connect (FF)
or three-port quick connect (GG).
Hardware Used
•
Two-port Quick connect
B
~
Three-port Quick connect
B
X
3
X
1
14
Light
Switch
Fan
Switch
BLK
Line
WHT
in
GRD
- B l a c k
Swnch Box
- W h i t e
=
Greenl(bare)
Fan
house
house wires
~
Lowes.
c
om
~
-
·- :
~UTILITECH"
]
Publicidad
