Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 30-60 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Hammer,
Nails, Duct tape, Saw, Measuring tape, Pencil
INITIAL INSTALLATION INSTRUCTIONS
1 . Remove the motor assembly (C) from the
housing (A).
a. Loosen and remove the two motor screws (CC)
in the motor.
Hardware Used
CD
Motor Screw
x2
2.
Remove and discard the two foam inserts from
the long screws (AA) and remove cardboard on
the bottom of the motor assembly (C).
Hardware Used
Long Screw
ij)llllllllllllllllllllll lll
[ll>
x4
6
cardboard
('nuTILITECH'
J
Lowes
.com
~
- · -
Publicidad
