Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
Cleaning the Fan Assembly
1. Switch the power off at the service panel and lock the service disconnecting means to prevent
power from being switched on accidently.
2. Remove the light kit pan and unplug the fan assembly.
3. Gently vacuum the fan, motor and interior of the housing.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The fan does not
1. The fuse has blown or the breaker
1 . Replace the fuse or reset the
turn on.
needs to be reset.
breaker.
2. There is a loose connection in one
2. Ensure all of the connections are
or more of the wires.
secure.
3. The wires are not connected
3. Ensure the wiring matches the
correctly.
diagram.
The light does not
1 . The light bulb needs to be
1. Replace the light bulb with a new
turn on.
replaced.
bulb.
2. There is a loose connection in one
2. Ensure all of the connections are
or more of the wires.
secure.
3. The wires are not connected
3. Ensure the wiring matches the
correctly.
diagram.
The fan is noisy.
1 . One or more of the screws in the
1. Check and tighten all screws.
fan is loose.
2. Ensure the glass is secure.
2. The glass is not tightened securely
on the fan.
Lowes.
c
om
~
-
·- :
~UTILITECH"
]
18
Publicidad
