Publicidad
Idiomas disponibles
Idiomas disponibles
LIGHT KIT INSTALLATION INSTRUCTIONS
2. Install three mounting bracket nuts (DO) on the
threaded rods on the motor assembly (C) and tighten
until the light kit pan (G) is flush with the finished
ceiling.
e
Hardware Used
~
Mounting Bracket Nut
X
3
3. a. Install two bulbs (F) into the socket on the
light kit pan (G).
b. Place the glass shade (H) over the center
threaded rod in the light kit pan (G).
c. Tighten the finial (J).
CARE AND MAINTENANCE
A
WARNING: Never immerse metal or electrical parts in water.
Bulb Replacement:
Use two 60-watt max. type-A 15 medium-base bulbs.
Cleaning the Glass Shade and Light Kit Pan
Never use abrasive cloth, steel, wool pads or scouring powders on the glass shade or light kit pan.
1. Switch power off at the service panel and lock the service disconnecting means to prevent the
power from being switched on accidentally.
2. Remove the bulb glass cover and remove the glass shade.
3. Clean the shade with a soft cloth and a mild detergent solution or glass cleaner.
4. Remove the bulbs from the light kit pan.
5. Gently vaccum the light kit pan and wipe clean with a soft cloth.
Lowes.com
~
- · -
~
LITILITECH.
]
17
Publicidad
