Publicidad
Idiomas disponibles
Idiomas disponibles
While using and storing the accessory, carefully observe the
recommendations listed in this manual in order to prevent possible
damage or danger during use
1.
CLEANING
Use a soft and humid cloth to clean the accessory. Never use acetone,
solvents, alcohol, sponges or abrasive cloths, etc.
7. TECHNICAL SPECIFICATIONS
1.
TECHNICAL CHARACTERISTICS
Accuracy referred to STC conditions (1000W/m
Irradiance measurement
Measuring range [W/m
Sensitivity: 20µV/W/m
÷ 28.6 µV/W/m
2
2.
GENERAL CHARACTERISTICS
Reference guidelines
EMC:
IEC/EN61326-1
Technical documentation: IEC/EN61187
Calibration:
IEC/EN60904-2
Pollution level:
2
Electrical characteristics
Type of photovoltaic cell: Monocrystalline
Internal temperature sensor:
Visual range:
≥160°
Output connector:
3-pole HT connector (HT304k)
Length of output cable:
Mechanical characteristics
Dimensions (L x W x H):
Weight (with connection cable):
Mechanical protection:
Environmental conditions for use
Operating temperature:
24
CAUTION
, 25°C, AM=1.5)
2
2
] Accuracy
100 ÷ 1400
±3.0% reading
2
PT1000
5-pole HT connector (HT305)
approx. 2m
111 x 85 x 28mm (4 x 3 x 1in)
240g (8 ounces)
IP65 according to IEC/EN60529
-20°C ÷ 70°C (-4°F ÷ 158°F)
HT305 - HT304k
Publicidad
