Table 2: Troubleshooting
Service
Fan motor does not
work
Lights hum
Hood trips breaker
1.
Power supply is insufficient
2.
Electrical wiring is incorrectly connected
See Installation Instructions for further information
A slight hum is normal
1.
Electrical wiring is incorrectly connected
2.
Circuit is not sufficient.
See Installation Instructions for further information
How to Obtain Service or
Parts
Product Data Plate
To reach a service representative,
see the contact information at the front of the
manual. Please be prepared with the information printed on your product data
plate when calling.
The data plate shows the model and serial number. Refer to the data plate on the
appliance when requesting service.
It is located on the frame near the drawer.
Open the drawer to view it.
Data Plate
behind filter
Figure 6: Data Plate Location
English 7