cecotec PROCLEAN 4110 Manual De Instrucciones página 38

ENGLISH
- In case there is any manufacturing rests in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
Warning:
Never remove the mica plate.
3. PRODUCT ASSEMBLY
- Connect appliance to power outlet. Before connecting it, make sure the timer is set on
Zero position.
- Do not block the microwave ventilation screen.
- Place the food on the glass tray and close the door. Food must be placed on a container,
never directly on the glass tray.
- Select power level.
- Program timer. If the cooking time is less than 10 minutes, turn the timer knob passed 10
minutes and then take it back to the desired number of minutes.
- Once the timer is programmed the microwave will start operating. If pausing is needed
during operation, open the door at any time.
- Once the door is closed again, the product will start operating again.
- When the timer times out and the cooking is finished, a bell will ring and the inside
light will automatically turn off. If food is removed from the microwave before the bell
rings,make sure you put the timer back to Zero position in order to avoid it from operating
empty.
4. OPERATION
Timer
- The maximum cooking time that can be set is 30 minutes.
- Each setting is 1 minute.
- A bell will ring when the cooking process finishes and the timer will go back to Zero
position.
Power knob
There are 5 power levels:
High power
Medium-High power
Medium power
38 PROCLEAN 4110
100 % power output
81 % power output
58 % power output
Quick cooking
Normal cooking
Slow cooking