Installation; Routing Details - Winkhaus blueMatic EAV Instrucciones De Montaje

Installation, Operating and
Maintenance Instructions
EN

3 Installation

3.1 Routing details

For installing the blueMatic EAV it is required to rout out for standard three-
3
point locking system and additionally the motor housing, as shown in the
following diagrams.
Recommended routings
Figure 3.1-1: Dimensions for blueMatic EAV
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
Recommended routings
36 5044744
D = Backset
G = Handle position
L = Length
** = croppable
nT = low doors
hT = high doors
Caution!
Requirement for profile
cylinder:
Cylinder with not adjus-
table cam have to have
cam position max. 45°
left / right hand in key
removal position.
Requirement for
profile cylinder with
adjustable cam:
Cylinder have to have
cam position max. 45°
or 4-o'clock-position to
the hinge side in key
removal position.