Winkhaus blueMatic EAV Instrucciones De Montaje página 139

Installation, Operating and
Maintenance Instructions
Notice: If you plan installations on a metal substructure, you will
have to use a timber board and spacer bolts, if applicable, or
large bore holes to ensure the proper function of the antenna!
To test the scanning performance, you may have to tentatively
install it on site, if applicable!
• Connect the cable of the antenna (fixed in the antenna) to the reader / control
unit.
• Recommendation: Lay a reserve pipe from the antenna to the reader unit.
Figure 3.4-1: Terminal assignment of the transponder reader
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
No.
1 red
2 black
3
4
5 white
6 white
7 green
8 green
45 5044744
Terminals
"12 V DC"
"0 V DC"
serial interface
serial interface
Antenna
Antenna
potential free contact C
potential free contact NO
EN
3