Bluematic Eav With Transponder - Winkhaus blueMatic EAV Instrucciones De Montaje

Installation, Operating and
Maintenance Instructions
EN
4.2

blueMatic EAV with Transponder

4.2.1 Operation
The reader unit controls and monitors the access to the door.
• It is operated by means of transponder chips that work contactless.
• Hold a programmed transponder chip within (0 - 5 cm) of the antenna.
4
• Once the transponder chip is close enough to where it can read the
information, communication is established contact free.
• The transponder data is transmitted to the reader unit via the antenna.
• An acoustic signal at the reader unit will acknowledge the data transfer.
• The reader checks whether this transponder chip is authorized to access and
allows or denies access.
Action
Door with transponder
chip "Open"
• After the enable time has elapsed, another fob can be recognized and
evaluated.
• If a transponder chip is unknown to the reader, it does not have access rights
and access will be denied.
Action
Door with transponder
chip "Open"
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
Acoustic Signal
n n
short, short
Acoustic Signal
n nnnnn
short, long
68 5044744
Result
authorized
Result
not authorized