Winkhaus blueMatic EAV Instrucciones De Montaje página 166

Installation, Operating and
Maintenance Instructions
EN
Action
1) Press buttons A and
B (of a programmed
remote control) simul-
taneously *
2) Press A button
(of the same remote
4
control)
3) Press all buttons to
be taught in succession,
as long as the teach-in
mode is active
* If no remote control has been taught (e.g. after delete-all function), it would
apply to all remote control. The teach-in mode can be started with any
remote control.
Deleting wireless remote controls directly via the remote control
Partial deletion
Action
1) Press buttons A and
B (of a programmed
remote control) simul-
taneously *
2) Press A button
(of the same remote
control)
3) Press all buttons to
be deleted in successi-
on, as long as the delete
mode is active
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV
Acoustic Signal
n
short
nnnnnnnnnn
continuous signal (as
long as teach-in mode
is active)
nnnn nnnn
continuous signal is
briefly interrupted
Acoustic Signal
n
short
nnnnnnnnnn
continuous signal (as
long as delete mode is
active)
nnnn nnnn
continuous signal is
briefly interrupted
72 5044744
Result
Teach-in mode
started
Teach-in mode
active
pressed button(s)
is / are authorised
Result
Teach-in mode
started
Teach-in mode
active
pressed button(s)
is / are deleted