Publicidad
EN
Installation
RO Instalare
04
[02] x 2
213294_s1_s12-5059340169484_5059340169606-NoName-A5-IM-Multi-V06.indd 14
213294_s1_s12-5059340169484_5059340169606-NoName-A5-IM-Multi-V06.indd 14
FR
Installation
ES
Instalación
3
2
1
EN
Whilst the fridge is tilted back, replace the T20 screws to the left underside
of the carcass and stand upright on the floor.
Relocate the door on the hinge pin and replace the inverted centre hinge
and restricter pins [02].
IMPORTANT: Support the door throughout until secured in place.
Ensure that the door aligns with the edge of the carcass and the bottom
and centre hinges may need adjusting.
DO NOT TILT TOO FAR AND ENSURE THAT THE FRIDGE BASE CANNOT
SLIP OR FALL.
PL
Instalacja
PT
Instalação
4
[02]
14
14-03-2022 11:08:19
14-03-2022 11:08:19
Publicidad
