essentiel b ERDV180-70miv1 Instrucciones página 12

5) Dismantle the door stop of the two door bodies and the self-locking screws of right
door, then take out the self-locking of left door from the accessory bag and install it
to the left corner of the door body together with the door stop; take out the bottom
support block of the door body of refrigeration chamber and install it to the lower
left corner. Finally take out the hole plug and shaft sleeve for the door of refrigeration
chamber and adjust their positions, and then install them into the door body; take out
the right decorative cover on the door of refrigeration chamber, and take out the left
decorative cover from the accessory bag and install it.
Self-locking
of left door
6) Install the door of refrigerator chamber on the lower hinge, the middle hinge on the left
side of the refrigerator and tighten the screws, and place the shaft sleeve well. Install
the plug pin in the hole on the middle beam at the other end.
12
Support block
Self-locking
Door stop
of right door
sleeve pipe
Hole cap
Right decorative cover
Right decorative cover