Power Supply - Roadstar CLR-2285/WD Manual De Instrucciones

WARNINGS
The exclamation point within the triangle is a warning sign
alerting the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle is
a warning sign alerting the user of "dangerous voltage" inside
the unit.
To reduce the risk of electric shock, do not remove the cover.
No user serviceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains
in OFF position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet
or in a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating
sources.
Make sure the batteriy is inserted according to the proper
polarity.
If the unit is not used for a long period of time (more than 1
month), remove the battery from the compartment to avoid
possible leaking.
English 1 2
CLR-2285/WD
FM DIGITAL PLL ALARM CLOCK RADIO
TABLE OF CONTENTS
•
•
•
•
LOCATION OF CONTROLS
1. OFF/ON Switch (Radio)
2. SLEEP SNOOZER DIMMER Button
3. SET CLOCK / MEM/M+ Button
4. TUNING Down AUTO TOGGLING Button
5. CLOCK LCD Display
6. AC POWER CORD
7. VOLUME DOWN / ALARM 1 Button
8. VOLUME UP / ALARM 2 Button
9. TUNING UP / D.S.T. Button
10. FM WIRE ANTENNA
11. BATTERY COMPARTMENT (BACK-UP MEMORY)
12. SPEAKER
POWERSUPPLY
This unit operates from a main supply of 230V ~ 50Hz. Connect the AC
English
LOCATION OF CONTROLS

POWER SUPPLY

AC POWER
SPECIFICATIONS