Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARE
THE HOOD, cont'd.
NON-DUCTED HOODS ONLY
3. Install the non-ducted
recirculation
plenum through
the upper rectangular
openings in the support frame. Fig. 13
4. Install the 5" diameter duct connector to plenum. Twist and lock to secure. Fig. 14.
5. Attach 5" diameter metal expandable duct to the plenum. When stretched, it must
be tong enough to reach the bottom of the support frame. Fig. 14.
6. Duct tape all joints to make them secure and air tight.
NON-DUCTED
RECIRCULATION
PLENUM
\
DUCT
CONNECTOR
_
5"METAL
EXPANSION
DUCT
INSTALL
UPPER
DECORATIVE
FLUE
DUCTED HOODS ONLY
(8=FOO T AND 9=FOOT CEILINGS)
1. Install and secure the upper flue to the
support
frame
with
(2) 2.9x9.5mm
mounting screws. Fig. 15.
• On 8-foot ceilings, install with air vents
down.
• On 9-foot ceilings, install upper flue with
air vents up.
(10-FO0 T CEILINGS)
2. Discard the upper flue supplied with the
hood.
Replace
with
the upper
flue
supplied
with flue
extension
model
FX54SS.
3. Install and secure the upper flue to the
support
frame
with
(2) 2.9x9.5mm
mounting screws.
MOUNTING SCREWS
(2,gxg.Smm)
_
UPPER
FLUE
-11 -
Publicidad
