Publicidad
Idiomas disponibles
Idiomas disponibles
The current active option setting is
displayed on the right.
These settings can now be changed
with the "Select" button. Press the
button to jump to the next possible
setting.
FiT Pressing the "Menu" button again,
saves the previously settings.
If you don't press any button for 10
seconds the settings are saves
automatically.
Start
Delay @
_71f
you have chosen the additional
option "Start Delay" the symbol ('L}
is displayed.
Extra care
_71f
you have chosen the additional
option "Extra care" the
"Delicates/Iow temp." indicator
light illuminates.
Pressing the "Delicates/Iow temp."
button cancels the additional
option "Extra care".
FiT If you have chosen the additional
option "Extra care" the symbol
is displayed.
Safety
guard
--O
This additional option allows you to lock
your settings to prevent unintended use
of the dryer.
To start the dryer when the Safety
guard is active:
Press and hold the "Start/Stop"
button for 4 seconds.
To unlock this additional option when
the dryer is running:
Press and hold the "Start/Stop"
button for 4 seconds.
FiT When the dryer is running and the
"Safety guard" is active, the dryer
can be stopped by pressing the
"Start/Stop" button for 4 seconds.
FiT If you have chosen the additional
option "Safety guard" the symbol
_o is displayed.
Degree
of dryness
The residual moisture can be
individually reduced in 3 steps.
1, 2, 3: programs are lengthened
FiT If you have chosen the steps 1 to 3
of the additional option "Degree of
dryness" the symbol -:O? i s
displayed.
0 is standard setting - symbol -:O? i s
not displayed.
n4,_
Volume
of the signal
_,ly
Your dryer outputs different signals.
Signal
Type
Comment
Sta_
Shorttone
Adjustable
volume
Dampdry
Sequence of
Adjustable
medium
volume
lengthtones
End
Sequence of
Adjustable
shorttones
volume
Mal-
Sequence of
Adjustable
operation
10ng tones
volume
Warningof
Sequence of
Maximum
mal-
10ng tones
volume
function
You can change the volume of the
adjustable signals:
Press and hold the "Select"
button.
-
off
m
- - _
increasingly
ml
- - -
maximum
Spin Speed
To optimize the remaining time display,
the spin speed at which the laundry
was previously spun in the washing
machine can be entered.
FiT The @-symbol is only displayed for
adjustment.
Options
start
Delicates Extended
Pause
low temp. wrinkle
block
0
Delicates
Press the "Delicates/Iow temp." button
for temperature sensitive textiles.
Observe the care information or
symbols on the textiles. The
temperature of the drying process is
reduced, the drying time is extended.
FiT For extreme temperature sensitive
textiles
(e.g. camisoles, paints) press the
"Delicates/Iow temp." button and
set additional option Extra care
(see Page 14) to reduce the
temperature of the drying process
another time.
Extended
Wrinkle
Block
To prevent the laundry from creasing,
the dryer drum rotates at specific
intervals following the drying program.
Standard setting for this function is 1
hour.
If the "Extended Wrinkle Block" button
is pressed, this function is extended to
3 hours.
The laundry remains loose and fluffy
until it is removed. The laundry should
be removed at the latest after this time
has elapsed.
Indicator
of program
sequence
The dryer uses an electronic scanning
system for all programs except the time
programs and the special "Wool Care"
program. A moisture sensor
continuously checks the moisture in the
laundry. Drying ends automatically as
soon as the selected degree of dryness
has been reached.
The drum continues to rotate at
specific intervals for one hour to
prevent creasing.
The current state of the process and
the level reached during the program
sequence is indicated via indicator
lights (Drying, Damp dry, Regular dry,
Wrinkle block).
@Lint filter
FiT
f the indicator Hght "Wrinkle block"
um_nates wnen the program
selectorls
n Off-Position
turn off
the circuit breaker and call for
customer service!
15
Publicidad
