HIKOKI WR 18DH Instrucciones De Manejo página 10

English
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
WR18DH / WR36DH: Cordless Impact Wrench
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Direct current
V
Rated voltage
n
0
No-load speed
min
-1
Oscillation per minute
Bpm Impact rate
Ordinary bolt
H
High tension bolt
MT
Tightening torque (Maximum)
Square drive size
Weight * 1
kg
(According to EPTA-Procedure 01/2014)
Switching ON
0
Switching OFF
Disconnect the battery
Clockwise rotation
Counterclockwise rotation
High / Low mode selector switch
High / Low mode indicator lamp
Auto stop mode selector switch
Auto stop mode indicator lamp
Warning
*1 Depending on attached battery. The heaviest weight is
measured with BSL36B18X (sold separately).
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains
the accessories listed on page 252.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Tightening and loosening of all types of bolts and nuts,
used for securing structural items
SPECIFICATIONS
1. Power tool
The specifications of this machine are listed in the
Table on page 251.
<WR36DH>
Existing batteries (BSL3660/3620/3626, BSL18 and
BSL14 series) cannot be used with this tool. Use a multi
volt type battery.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
10