HIKOKI WR 18DH Instrucciones De Manejo página 16

English
Symptom
Switch can't be pulled
An abnormal high-pitched noise
occurs when the trigger switch is
pulled.
Battery cannot be installed.
(WR36DH)
Possible cause
The Push button is positioned
halfway
The trigger switch is being pulled only
slightly.
Attempting to install a battery other
than that specified for the tool.
16
Remedy
Press the button firmly into position
for the desired direction of rotation.
This is not a malfunction.
It does not occur if the trigger switch
is pulled more fully.
Please install a multi volt type battery.