Maytag Jenn-Air JEC8536 Guia Del Usuario página 4

[SUR;%(E CONTROI S]
Use to turn on the surface dements. An
infinite choice of heat settings is avaihble
from ko to Hi. The knobs can be set on or
between any of the settings.
...._...... ..... ,
(}ON'r:ROLL ,9( ,¢ ,}as
Modem JEC8536
1 2 3 4 5
[o Left front dement
2, Left rear dement (bridge dement)
3o Center dement
4. Right rear dement
5o Right front dement (dual dement)
Model JEC8430
,/ \........... /
......... J
12 34
l o Left front element
2o Left rear dement
3. Right rear dement
4. Right front dement (dual dement)
SET'lING 'THE
l o Placepan on surface dement
2, Push in and turn the knob in either
direction to the desired heat setting.
3. After cooIdng, turn knob to OFF.
Remove pan.
DUAL E:[,E£ENT
The cooking surface is equipped with a dual
dement located in the right front position.
To operate, push in on the control [<nob
and turn to the right to control the sinai[
dement, or push in and turn to the [eft to
control the large dement
4/
HI
\
4
2
Drawing shows control knob markings for
Dual and Bridge (select models) elements
B]:_IDGE ELEIklENT
For added flexibility, the cooking surface is
equipped with a bridge dement to accom-
modate longer gourmet pans and skillets.
The bridge dement is located in the left
rear position,
To
operate,
push
in on the
control knob and turn to the right to
control the sinai[ dement, or push in and
turn to the left to control the bridge ele-
ment
ON IND CA }RS
AI Hodems - A red indicator lightwill glow
when any element is turned ON.
..... .... _ J
IN[HQ,¢:r LH::,HTS
Each dement has a hot surface indicator
light A light will be ilhminated when the
matching cooking area is hot. [t wiiI remain
on, even after the control is turned off, until
the area has cooled. The lights are located
near the control knobs.
S{.1GGESTED
HEAT
The size, type of cookware and cooking
operation wiiI affect the heat setting. For
information on coN<ware and other fac-
tors affectingheat settings,refer to "Cook-
ing Made Simple'* booklet
Hi:
Use to bring liquid to a boil. Always
reduce setting to a lower heatwhen
liquids begin to boil or foods begin
to cook.
6-8:
(medium
high)
Use to brown meat,
heat oil for deep fat frying or saute-
ing. Haintain fast boil for large
amounts of liquids.
4-6: (medium) Use to maintain slow boil
for large amounts of liquids and for
most frying operations.
2-4: (medium low) Useto continue cook-
ing covered foods or steam foods.
Lo:
(low) Use to keep foods warm and
melt chocolate and butter.
8 2
/
Hi LO
OFF