Descargar Imprimir esta página

Scheppach Compact 15t Traduccion Del Manual De Instrucciones Originale página 51

Ocultar thumbs Ver también para Compact 15t:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 111
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
- Public disposal or collection points (e.g. municipal
works yards).
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or offer to do so voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- For additional take-back conditions of the man-
ufacturers and distributors, please contact the
respective customer service.
17. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing
to work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
The motor (17) ends
the splitting process
automatically.
Log is not split.
Splitting column (2)
vibrates,
generates noises.
Hydraulic pump
whistles.
Oil leakage at splitting
column (2)
or in other places.
Possible cause
Overvoltage protective device was
triggered.
Log splitter loaded incorrectly.
Splitting wedge (3) is blunt.
Oil leaks.
Low oil and excess air in the hydraulic
system.
Too little hydraulic oil in the hydraulic oil
tank (14).
Trapped air in the hydraulic system during
operation.
Bleed screw (15) not tightened before
transport.
Oil drain screw (33) loose.
Oil valve and/or seals defective.
www.scheppach.com
• In the case of delivery of a new electrical device by
the manufacturer to a private household, the latter
may arrange for the free collection of the old elec-
trical device upon request from the end-user. Get in
contact with the manufacturer's customer service.
• These statements only apply to devices installed
and sold in the countries of the European Union
and which are subject to the European Directive
2012/19/EU. Different provisions may apply to the
disposal of electrical and electronic appliances in
countries outside the European Union.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
electrical devices.
Fuels and oils
• Before disposing of the unit, the fuel tank and the
engine oil tank must be emptied!
• Fuel and engine oil do not belong in household
waste or drains, but must be collected or disposed
of separately!
• Empty oil and fuel tanks must be disposed of in an
environmentally friendly manner.
Remedy
Call a qualified electrician.
Insert the log correctly.
Grind the splitting wedge (3).
Locate the leak, contact the dealer.
Check the oil level, top up if
necessary, otherwise contact the
dealer.
Top up hydraulic oil.
Loosen the bleed screw (15) two
turns before use.
Tighten bleed screw (15) before
transport.
Tighten the oil drain screw (33) firmly.
Contact dealer.
GB | 51

Publicidad

loading

Este manual también es adecuado para:

59054229969