Publicidad
Declaration of Conformity of Final Machinery
in accordance with Annex II, section 1.A. of the Directive 2006/42/EC
For the following products:
Types 3241-1/-7 Pneumatic Control Valves consisting of the Type 3241 Valve and
Type 3271/Type 3277 Pneumatic Actuator
We hereby declare that the machinery mentioned above complies with all applicable requirements
stipulated in Machinery Directive 2006/42/EC.
For product descriptions of the valve and actuator, refer to:
-
Type 3241 Valve (DIN): Mounting and Operating Instructions EB 8015
-
Type 3241 Valve (ANSI): Mounting and Operating Instructions EB 8012
-
Types 3271 and 3277 Actuators: Mounting and Operating Instructions EB 8310-X
Valve accessories (e.g. positioners, limit switches, solenoid valves, lock-up valves, supply pressure
regulators, volume boosters and quick exhaust valves) are classified as machinery components in this
declaration of conformity and do not fall within the scope of the Machinery Directive as specified in
§ 35 and § 46 of the Guide to Application of the Machinery Directive 2006/42/EC issued by the
European Commission. In the SAMSON Manual H 02 titled "Appropriate Machinery Components for
SAMSON Pneumatic Control Valves with a Declaration of Conformity of Final Machinery", SAMSON
defines the specifications and properties of appropriate machinery components that can be mounted
onto the above specified final machinery.
Referenced technical standards and/or specifications:
-
VCI, VDMA, VGB: "Leitfaden Maschinenrichtlinie (2006/42/EG) – Bedeutung für Armaturen,
Mai 2018" [German only]
VCI, VDMA, VGB: "Zusatzdokument zum „Leitfaden Maschinenrichtlinie (2006/42/EG) –
-
Bedeutung für Armaturen vom Mai 2018" [German only], based on
DIN EN ISO 12100:2011-03
Comment:
Information on residual risks of the machinery can be found in the mounting and operating
instructions of the valve and actuator as well as in the referenced documents listed in the mounting
and operating instructions.
Persons authorized to compile the technical file:
SAMSON AG, Weismüllerstraße 3, 60314 Frankfurt am Main, Germany
Frankfurt am Main, 20 December 2022
Norbert Tollas
Senior Vice President
Global Operations
Classification: Public · SAMSON AKTIENGESELLSCHAFT · Weismüllerstraße 3 · 60314 Frankfurt, Germany
EB 8015 ES
Peter Scheermesser
Director
Product Maintenance & Engineered Products
Revision no. 02
Page 1 of 1
14-9
Publicidad
