Operation
English
Information function
During the cooking process, if the clock is set, press the "Clock" key to check the current time; If the re-
minder function is set, press the "Reminder" key to check the reminder time.
During the reminder function, if the clock is set, press the "Clock" key to check the current time.
Start / Pause / Cancel
If the cooking time has been set, press the "Play" key to start cooking. If cooking is paused, press the
"Play" key to continue cooking.
During cooking, press the "Pause" key once to interrupt cooking. Press the "Pause" key twice to cancel
cooking.
Energy saving function
In standby or reminder mode, press the "Play" key for 3 seconds to turn off the LED display and enter the
power saving mode.
In standby mode, if no operation is performed within 10 minutes, the LED display will turn off and enter
power saving mode.
In power saving mode, press any key or turn the knob to turn off the power saving mode.
Child lock
Activate the child lock: Press the "Play" and "Pause" keys for 3 seconds at the same time, a beep will be
heard and the "Child Lock" icon will light up, indicating that the child lock has been activated.
Deactivate the child lock: Press the "Play" and "Pause" keys for 3 seconds at the same time, and a beep
will be heard, indicating that the child lock has been deactivated.
Pyrolytic function
This function allows the oven cavity to be thoroughly cleaned.
Turn the knob "K1" to select the pyrolytic function. PyR" appears on the display.
Press the "Play" button to confirm, and the default operating time will be 2 hours.
Turn the "K1" knob to set the operating time. The time can be set to 1:30 or 2:00 hours.
If the oven door is not closed, the start button cannot be pressed and the LED will display "door", "PYR".
If the core temperature of the oven is above 320°C, it will not be possible to press the start button. The
LED will show "COOL" and "PYR". When the furnace core temperature is below 200°C, press the cancel bu-
tton once, it will pause; press again, it will return to the standby status. If the temperature is above 200°C,
press the cancel button once and it will return directly to the standby state.
Open the door when the oven is running, the LED will show "door" and an alarm will sound continuously
until the door is closed or press the cancel button.
Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure the oven
is empty. Do not leave anything inside (e.g. pans, baking tray, drip tray, sliding rack, etc.), as this could
seriously damage them.
When the pyrolytic cleaning is finished, do not turn off the electricity for one hour.
44
infiniton.es