Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance & Cleaning
4
3
2
1
Installation and removal of the metal shelves
To remove the metal shelves, press the clips shown with arrows in the figure, first remove the bottom
and top from the installation position. To install the metal shelves,
reverse the procedure to remove the metal shelves.
Replacing the oven light
WARNING: To avoid electric shock, be sure to disconnect power to the oven before replacing the light.
First disconnect power to the product and make sure the product is cool.
Turn off and disconnect the power supply to the furnace. Make sure that the internal parts are cool befo-
re touching them.
Remove the lamp cover by turning it counterclockwise (note that it may be somewhat stiff), replace the
bulb with a new one of the same type.
Insert the new bulb, which must be resistant to 300°C. For bulb replacement, please contact your service
center.
If in doubt, ask a qualified electrician for assistance.
Rack positions
It is important to position the rack correctly in the oven. Do not allow the
rack to touch the rear wall of the oven. The positions of the The positions
of the racks are shown in the figure below. You can place a deep or stan-
dard tray on the lower and upper metal shelves.
47
English
infiniton.es
Publicidad
