ENGLISH
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. OPERATION
Household socket
1.
Make sure that the mode switch is in the OFF position before connecting the mini fridge
to a power outlet.
Plug the AC power cable into the AC connector of the mini fridge.
2.
3.
Place the mini fridge on a stable surface and plug the other end of the cable into a power
outlet.
4.
Set the switch to Cooling mode or Heating mode.
Using the power level switch, choose between MAX or ECO according to your needs.
5.
6.
Turn the mode switch to the OFF position to switch off the device.
Car plug socket
Keep the switch in the OFF position before connecting the mini fridge to the socket in your
1.
car.
2.
Plug the DC power cable into the DC connector of the mini fridge.
3.
Place the mini fridge on a stable surface and plug the other end of the cable into the
connector in your car.
4.
Set the switch to Cooling mode or Heating mode.
5.
Turn the mode switch to the OFF position to switch off the device.
WARNING:
-
For the operation of the mini fridge, it is necessary to use the car engine. Make sure that the
motor is switched on before connecting the device.
-
If you switch on the car engine with the mini fridge connected, this may cause a power
surge which could damage the appliance and even result in a fire.
-
Do not leave the mini fridge running in the car with the engine switched off.
-
Before placing any product inside, test the cooling and heating functions.
Internal temperature
-
The temperature inside the refrigerator will not immediately reach the desired temperature
when it is switched on.
-
It usually takes about 2/3 hours* to reach the desired temperature. The minimum
temperature of the mini fridge varies according to the ambient temperature.
*Approximate figure that can vary depending on different aspects.
B O LE R O TR AV ELCOOLING 2 6L
34
B O LE R O TR AV ELCOOLING 3 2L
Cooling
-
For faster cooling, it is recommended to fill the mini fridge with drinks or food previously
chilled.
-
Temperature depends on the environment. The colder the ambient temperature, the cooler
the mini fridge will be. Ambient temperature is the temperature of surrounding air.
-
When the ambient temperature is 25°C, it can be cooled down to about 8°C*.
*Approximate figure that can vary depending on different aspects.
Heating
-
The appliance is also designed to keep warm. The mini fridge is not designed to heat
objects, food or cold drinks. However, you can cool down colder foods after at least 2 hours
or so.
-
After switching the mini fridge off, hot items will maintain their temperature for several
hours, provided the door is properly closed. Temperature dwell time will vary depending
on environmental conditions.
-
Take care to avoid burns during use of the mini fridge in Heating mode.
-
When the room temperature is 25°C, it can be heat up to about 65°C*.
*Approximate figure that can vary depending on different aspects.
Note:
-
Make sure that the mode switch is at least 30 minutes in the off position before switching
between modes.
-
If used correctly, the device can preserve the temperature of food, hot or cold, for hours.
Ventilation and heat dissipation
Warning
-
Never use the mini fridge in a car with a voltage of 24V, or in a house with a voltage other
than 220-240V. This may cause malfunctions and fire.
-
This product should not be used near water and at high temperatures to avoid malfunctions,
electric shock and other accidents.
-
Transforming or tampering with the mini fridge and power cord will result in malfunction
and fire.
-
In summer, do not place the mini fridge inside the car or in the boot and other high
temperature places to avoid appliance failure.
-
When using the appliance in the car, be sure to switch on the engine and, if the engine is
switched off, disconnect the power cable.
-
Unplug the power cord when the appliance is not to be used for a long period of time.
ENGLISH
BO LERO TRAVELCOOLIN G 26L
35
BO LERO TRAVELCOOLIN G 32L