Descargar Imprimir esta página

cecotec CECOFRY NEON 5000 Manual De Instrucciones página 49

Freidora de aire

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
2. BEFORE USE
-
This device is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Air fryer
-
Instruction manual
3. OPERATION
1. Plug the appliance to an earthed wall socket.
2. Remove the basket from the air fryer with extreme care.
3. Place the ingredients on the rack in the basket of the fryer.
Note: do not exceed the MAX indicator line, as this may affect the final frying quality.
4. Put the basket back in the air fryer.
Note: do not touch the basket or the fryer for a short period of time after use, as it will be very
hot. Only hold the handle to move the fryer.
5. Set the corresponding temperature and time on the control panel for the ingredients you
wish to cook.
6. If the product is started to cook in a cold state, the cooking time should be increased by 3
minutes.
Note: if you prefer, you can preheat the product without adding the ingredients. The
preheating time is approximately 3 minutes, and you select the desired temperature
manually.
7. Some ingredients need to be turned halfway through the cooking process. To turn the
ingredients, hold the handle and remove the basket from the fryer, place it on a flat, heat-
resistant surface and stir the ingredients with a wooden or silicone utensil.
Note: never use metal utensils as these can scratch the racket protection.
8. Add water to the water tank without exceeding the MAX indicator line. To add water
during the process, press and hold the
diffuser into the air chamber. Some default programmes come with an automatic water
spraying function. This spraying is performed only once when the set time is completed.
Check the time table for these times. If you wish to spray before or after automatic
icon and the water will spray out of the
ENGLISH
CECOFRY NEON 5000
49

Publicidad

loading

Este manual también es adecuado para:

04983