Rechner Sensors TiLevel KFI-1 Instrucciones De Manejo página 15

Installation of cables
Wiring of the probes should be routed separately or screened from heavy conductor lines, as in
extreme cases inductive peak voltages can destroy the sensors despite the integrated protec-
tive circuit. Screened cable or twisted lines are recommended, especially for longer cable runs
> 5 m.
Pin connection for pluggable probes
4
Pin connection for pluggable sensors (front view)
3
• Plug connection conforms to standard, Pin 4 = teach connection
*5
1 2
Electrical connection
Electrical connection:
• Disconnect the system from all power.
• Connect the probe according to the connection diagram.
• Switch power on.
15