Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for purchasing an AEMC
Model 6612.
For the best results from your instrument and for your safety, you must read the
enclosed operating instructions carefully and comply with the precautions for use.
Only qualified and trained operators should use this product.
1.1 INTERNATIONAL ELECTRICAL SYMBOLS
Signifies that the instrument is protected by double or reinforced insulation.
CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol
is present, the operator must refer to the user manual before operation.
Indicates a risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous.
Indicates Important information to acknowledge
Ground/Earth
AC or DC
This product complies with the Low Voltage & Electromagnetic Compatibility
European directives.
In the European Union, this product is subject to a separate collection
system for recycling electrical and electronic components in accordance with
directive WEEE 2012/19/EU.
1.2 DEFINITION OF MEASUREMENT CATEGORIES (CAT)
CAT IV: Corresponds to measurements performed at the primary electrical
supply (< 1000 V).
Example: primary overcurrent protection devices, ripple control units,
and meters.
CAT III: Corresponds to measurements performed in the building installation
at the distribution level.
Example: hardwired equipment in fixed installation and circuit breakers.
CAT II:
Corresponds to measurements performed on circuits directly
connected to the electrical distribution system.
Example: measurements on household appliances and portable tools.
Phase Rotation Meter Model 6612 - User Manual
1. INTRODUCTION
Instruments Phase Rotation Meter
®
5
Publicidad
