Publicidad
Idiomas disponibles
Idiomas disponibles
7. By pressing the (
) DAY / SCHEDULE switches, the SET and SCHEDULE indicators go out and the
mode returns to normal.
Defi ning the schedule to be applied
1. Hold down the (
) DAY/SCHEDULE switches for more than 3 seconds and the SET indicator appears.
All the days and schedule numbers are indicated.
2. Press the (
) DAY/SCHEDULE switches until the day you wish to set blinks. When pressed, the day
blinks [Mon] → [Tue] →... → [Sun]→ [Mon~Sun] → [Mon~Fri] → [Sat, Sun] → [Mon]... If several days are
blinking, the same setting will be applied to all the days.
3. Press the (
) DAY switch until the schedule number you wish to set blinks.
4. Press the (
) SCHEDULE, and the SCHEDULE indication appears. Then the schedule number indicated
in step 3 is applied to the days set in step 2. Press the OK switch to activate or deactivate the schedule. If the
schedule is activated, the word SCHEDULE is lit up.
5. Press the TIMER switch and the mode returns to normal.
Cancelling the timer
In the normal mode, hold down the (
The NEXT SCHEDULE indicator blinks. (Cancellation of all the timer)
While the timer is in cancellation mode, hold down the (
than 3 seconds. NEXT SCHEDULE is indicated. (Timer activation)
Setting the temperature shifts (energy saving mode)
1. Set the ON/OFF operation as in steps 1 and 2 of the "Setting the timer" section, and then select "S" as the
schedule number.
2. Set the ON/OFF operation in steps 4,5 and 6 of the "Setting the timer" section, and set the ON/OFF time. The
temperature setting is then indicated.
3. Select the temperature shift with the
this time, the temperature shift is not set and the indication "- -" appears. When the TIMER switch is pressed,
the temperature is indicated and the mode changes to schedule number selection.
4. When the TIMER switch is pressed, the SET and SCHEDULE indicators go out and the mode returns to
normal.
NOTE:
1. When this operation is performed, the temperature shift indicator changes.
2. When this operation is performed, the temperature setting of the CSNET NET WEB or PSC-A64S has a normal range, while the remote
control setting may be changed to a new range.
3. The increase or decrease in the temperature setting during the scheduled time (±3 ºC or ±5 ºC) varies according to the operation mode.
- If the system is operating in FAN, COOL or DRY mode, the temperature variation is + .
- If the system is operating in HEAT, mode, the temperature variation is - .
INSTALLATION MANUAL
) DAY / SCHEDULE switches for more than 3 seconds.
) DAY / SCHEDULE switches for more
switches. "3" or "5" can be selected. If the reset switch is pressed at
15
S
Mon
:
NEXT SCHEDULE
:
OFF
Sat
Sun
1234S
SET Mon Tue Wed Thu Fri
:
:
ON
4
OFF
SET Mon Tue Wed Thu Fri
Sat
Sun
1234S
:
:
ON
4
OFF
SET Mon Tue Wed Thu Fri
Sat
Sun
1234S
:
SCHEDULE
:
ON
4
OFF
Mon
:
NEXT SCHEDULE
:
OFF
Mon
1234S
:
NEXT SCHEDULE
:
ON
Mon
1234S
:
NEXT SCHEDULE
:
ON
SET
1234S
:
SCHEDULE
:
ON
4
OFF
1234S
SET
:
SCHEDULE
:
ON
4
OFF
SET
1234S
:
SCHEDULE
:
ON
4
OFF
S
Mon
:
NEXT SCHEDULE
:
OFF
Publicidad
