Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Before cleaning, the air conditioner must be switched off and disconnected from the power supply
so as to avoid electric shocks or injuries.
Cleaning the air outlet port and the shell:
Don't use gasoline, benzene, diluents, polishing powder or liquid insecticide to clean them.
Do not clean them using hot water with a temperature above 50°C to avoid fading or
distortion.
Wipe them with a soft dry cloth.
Water or neutral dry cleanser is recommended if the dust cannot be removed.
The Wind Deflector can be dismantled to clean (as below).
Cleaning Wind Deflector:
Do not force-wipe the wind deflector with water to avoid falling off.
Cleaning Air Cleaner:
Don't rinse the air cleaner using hot water with a temperature above 50°C to avoid fading
and distortion.
Don't put the air cleaner on the fire to dry to avoid catching fire.
Wipe the dust with water or a dust collector.
(A) Wipe the dust with a dust collector.
Maintenance before and after Operating Season
Before Operating Season:
1. Please check the following. If an abnormal incident occurs, consult the post-service
personnel.
There is no blockage in the inlet and outlet ports of the outdoor and indoor units.
The earthing line and the wiring are correctly placed
2. After cleaning, the air cleaner must be mounted.
3. Switch on to the power.
After Operating Season:
1. Duringng sunny days, blowing can be performed for half a day to dry the inside of the
machine.
2. Electrical power should be shut down to save electricity, or the machine will keep consuming
power. The air cleaner and shell must be mounted after cleaning.
Attention
Attention
(B) Clean with a soft brush using mild detergent
if there is a lot of dust
Discard the water and air it to a
cool dry condition
4
Publicidad
