Philips Saeco Xelsis SM7786 Manual Del Usuario página 14

English
14
Tip: There is a cleaning calender on the last page of this user manual. Write down the dates on which
you have performed a cleaning action.
Cleaning the brew group
Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits.
Visit www.saeco.com/care for support videos on how to remove, insert and clean the brew group.
Cleaning the brew group under the tap
1 Open the service door and remove the brew group (see 'Removing the brew group from the
machine').
2 Rinse the brew group thoroughly with water. Carefully clean the upper filter (Fig. 28).
3 Let the brew group air-dry before you place it back. Do not dry the brew group with a cloth to
prevent fibers from collecting inside the brew group.
Cleaning the brew group with the coffee oil remover tablets
Only use Philips coffee oil remover tablets. Tap the Clean
follow the instructions on the screen. Visit www.saeco.com/care for detailed video instructions.
Lubricating the brew group
Lubricate the brew group regularly to ensure that the moving parts continue to move smoothly.
1 Apply a thin layer of grease around the shaft in the bottom of the brew group.
2 Apply a thin layer of grease to the rails on both sides.
See the table below for the lubrication frequency. Visit www.saeco.com/care for detailed video
instructions.
Usage frequency
Low
Normal
Heavy
Cleaning programs for the internal cappuccinatore
The machines has three programs to clean the internal cappuccinatore. The Auto Steam Shoot
cleaning program is automatically performed by the machine after brewing a milk-based drink. You
can select the HYGIESTEAM or DEEP MILK CLEAN program by tapping the Clean
through the cleaning menu. Then follow the instructions on the screen.
- Auto Steam Shoot: the machine shoots steam through the internal cappuccinatore to quickly rinse
it.
- HYGIESTEAM: the machine thoroughly cleans the internal milk system with steam. Place the milk
tube in the milk tube holder (Fig. 29) and follow the instructions on the screen.
- DEEP MILK CLEAN: Perform the 'DEEP MILK CLEAN' procedure with the Philips milk circuit cleaner
for a thorough cleaning of the internal milk system.
Cleaning the internal cappuccinatore under the tap
1 Open the door of the internal cappuccinatore (Fig. 8).
2 Remove the internal cappuccinatore by pulling it down (Fig. 30).
3 Disassemble the internal cappuccinatore by pulling the bottom part off the top part (Fig. 31).
Nr of drinks brewed daily
1-5
6-10
>10
icon and select 'Brew group clean'. Then
Lubrication frequency
Every 4 months
Every 2 months
Every month
icon and scrolling