Ego Power+ LM2200SP Manual De Operaciones página 24

ATTACHING/REMOVING THE
GRASS BAG (FIG. 5)
WARNING:
insert (factory-installed) or side-discharge
chute before attaching the grass bag to
the mower.
1. Switch off the mower and wait for
the cutting blades to come to a
complete stop.
2. Remove the battery pack.
3. Position the mower on a level surface.
4. Lift the rear-discharge door.
5. REMOVE THE MULCHING INSERT (FACTORY-INSTALLED) or the side-discharge
chute.
6. First insert the steel plate of the grass bag into the mower, then hook the grass
bag on the pivot rod. Release the rear-discharge door so that it rests on the grass
bag.
7. To remove the grass bag, lift the rear-discharge door on the mower. Lift the
grass bag up and off of the pivot rod.
8. Release the rear-discharge door.
WARNING:
hooks on the grass bag are firmly seated on the pivot rod and the rear-discharge door
rests firmly against the top of the grass bag.
WARNING:
reduce the risk of injury, frequently inspect the grass bag and replace the bag if there
are any signs of wear or deterioration. Use only grass bags manufactured for this
mower.
24
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2200SP/LM2200SP-FC
Remove the mulching
When using the grass bag, never operate the mower unless the two
Under normal usage, the grass bag material is subject to wear. To
5
Rear-discharge Door
a
Pivot Rod
Steel Plate
c
b
c
Hook