Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
There is
excessive
vibration.
Mower is
difficult to be
pulled back
after the self
propel is turned
off.
Mower is
difficult to
maneuver when
mowing around
an object or
mowing back
and forth with
self-propel
turned on.
The motor
works but
the blade set
doesn't cut the
grass.
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2200SP/LM2200SP-FC
CAUSE
◾
The cutting blade set is loose.
◾
The cutting blade set is
unbalanced.
◾
The cutting blade(s) is bent.
◾
The motor shaft is bent.
◾
The mower is set to cut too much
grass at once.
◾
The blade speed mode is not set
properly.
◾
The wheels are temporarily
locked.
◾
The wheels are temporarily
locked.
◾
The shaft bolt is not tightened to
the required torque.
SOLUTION
◾
Tighten the shaft bolt.
◾
Balance the blade set following
the"SHARPENING THE
BLADES".
◾
Replace the blade(s).
◾
Contact EGO Customer Service.
◾
Raise the deck to a higher
cutting-height setting.
◾
Select the blade speed to a
lower setting.
◾
Simply push ahead slightly or
raise the rear wheels and then
move the mower as desired.
◾
Turn off the self propel.
◾
Re-tighten the shaft bolt. The
recommended torque is 36-43
ft-lb (50-60 Nm).
49
Publicidad
