Publicidad
Idiomas disponibles
Idiomas disponibles
the heavy or lower end until the blade is balanced. It is balanced when neither
end drops (Fig. 18b).
6. Replace the blade on the mower and tighten it securely.
WARNING:
at high speeds. It may cause damage to the mower and could break, causing personal
injury.
LUBRICATING THE MOWER
All of the bearings in this product are lubricated with a sufficient amount of high grade
lubricant for the life of the unit under normal operating conditions. Therefore, no further
bearing lubrication is required.
STORING THE MOWER
The following steps should be taken in order to prepare the lawn mower for storage.
1. Remove the battery pack from the mower and store it at room temperature in a
dry location.
2. Clean the mower as described earlier in the "MAINTENANCE" section.
3. Inspect the blade and replace it or sharpen it if required.
4. Store the mower in a dry, clean location. Do not store it next to corrosive
materials, such as fertilizer or rock salt.
5. Store the mower in a covered and enclosed space that is cool and dry and out of
the reach of children.
6. Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap
moisture around the mower, which causes rust and corrosion.
56-VOLT LITHIUM-ION CORDLESS 22" LAWN MOWER — LM2200SP/LM2200SP-FC
An unbalanced blade will cause excessive vibration when rotating
45
Publicidad
