Descargar Imprimir esta página

IKEA VAPPEBY Manual Del Usuario página 12

Ocultar thumbs Ver también para VAPPEBY:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Stereo pairing:
Two VAPPEBY Portables can be stereo paired:
1. M ake sure both speakers are in Bluetooth search mode.
2. D ouble-press the power button on one of the speakers. A sound will
confirm successful stereo pairing.
3. C onnect to the source device by following the Bluetooth pairing
instructions.
Good to know
• The speaker is suitable for outdoor use, protected against dust and water
according to IP67.
• If the speaker's front protection is soaked with water, acoustic
performance may be affected temporarily, but it will go back to normal
once the water is gone.
• Devices and the battery may get warm during charging. This is completely
normal, and they will gradually cool down again after they are fully
charged.
• Charging time may vary based on the device's battery capacity, charge
level, the age of the battery and the temperature in the surrounding area.
• USB cable length and quality influences charging speed and performance.
• Storage temperature: -20 °C to 25 °C (-4 °F to 77 °F).
• Unplug the product from the power supply before cleaning and when it is
not in use.
• The battery should not be left discharged for a longer period.
• The battery should not be charged while in contact with flammable
materials like textiles.
WARNING:
• Too high volume can damage your hearing.
• Do not charge the product when it is wet.
• Only charge the product indoors.
• Do not use a defective power supply when charging the product.
• Never use a damaged or faulty USB cable for charging since this can
damage the product and your devices.
• Never install the product in a confined space.
• Always leave a space of at least 5 mm around the product for ventilation.
12

Publicidad

loading

Este manual también es adecuado para:

E2133