Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing
the Blender
for Use
Before
First
Use
Before using your Blender for the first time,
wipe Blender base with
a warm
sudsy
cloth, then wipe clean with
a damp cloth.
Dry with a soft cloth. Wash one-piece
pitcher, lid, and ingredient
cap in warm,
sudsy water or just add soap and warm
water to the pitcher, place it on the Blender
base, and blend to clean (see Care and
Cleaning,
p. 12). Rinse parts and wipe dry.
2. Place the one-piece pitcher on the
Blender base.
Blender
Assembly
1. Adjust
the length
of the power cord to
suit your needs.
J
3.
4.
Electrical
Shock Hazard
Plug into a grounded
3 prong
outlet.
Do not remove ground
prong.
Do not use an adapter,
Do not use an extension cord.
Failure to follow
these
instructions can result in death,
fire, or electrical shock.
Plug into a grounded
3-prong
outlet.
Blender is now ready for operation.
Before removing
the pitcher from the
base after use, always press OFF and
unplug
the power
cord. If using the
Pulse Mode,
make sure the blinking
red light is off (by pressing OFF) then
unplug.
Lift the pitcher
in a straight,
upward
motion
off of the Blender base.
Publicidad
