8. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) HOOD ONLY)
All internal blower hoods are factory shipped with the blowers mounted for a vertical discharge configuration. For a horizontal
discharge configuration, disassemble the blower(s) from the inner top of the hood and mount it (them) to the inner back panel
of the hood. The procedure below applies for one or two blowers.
Lert Sipe Mountine
Screw Locarion
Using
a 5/16"
socket,
remove
all
blower
mounting
screws from the
inner top
of the
hood.
Keep
the
screws for further use.
MouNTING Screw
Location
Slide the blower to disengage
its flange from the
retaining bracket.
HD0270.
RIGHT. SIDE
|
lOUNTING SCREW
Rotate the blower and engage
its
ai
flange
in the
back
wall
retaining
bracket.
Using
a
5/16"
socket
and
the
screws previously removed, secure
the blower to the hood.
OMARION
HD0288