Publicidad
Idiomas disponibles
Idiomas disponibles
FILTER CARE
2. Resetting The Unit
After replacing the filters, turn the power
①
back on and then use a thin object, such as
a paper clip, to press the RESET switch for
5 seconds.
3. Cleaning the Fabric Pre-filter
Intervals between filter cleaning may vary depending on the air quality.
Use a light brush to clean if the filter's
①
pattern can be seen. If the filter's pattern can
be seen clearly, we recommend using the
filter only after washing. This signals that a
lot of dust has accumulated.
②
We recommend the use of a vacuum cleaner to remove light dust buildup.
If there is a lot of dust, we recommend hand-washing the filter under running
③
water with synthetic detergent. However, the microfiber in the filter may be
damaged if a brush is used during hand-washing.
ˍ Do not use detergent or soap.
ˍ Allow the filter to dry for 24 hours or more before using.
When using a washing machine, we recommend washing the filter by itself to
④
prevent other items from becoming discolored or contaminated.
※ If the Fabric Pre-filter becomes damaged or in any way needs replacement:
Please contact your local dealer
NOTICE
English
ˍ Do not use benzene, alcohol, or other volatile fluids,
which may cause damage or discoloration.
ˍ The Fabric Pre-filter is reusable after cleaning, ensuring it is
completely dry.
ˍ If the fabric material is full of dust in some places,
we recommend lightly scrubbing the filter with water or
neutral soap using a soft cloth or sponge before allowing it
to completely dry.
ˍ Hand-washing of the filter will allow it to be used for a longer
period of time.
ˍ When cleaning or washing the fabric filter, we recommend
that it first be removed from the unit.
ˍ Do not use hot water over 40
paint thinner.
ˍ After washing the filter, allow it to dry completely in a well
ventilated area. Otherwise, it may develop a bad odour.
o
C or volatile fluids such as
ZERO-N
15
Publicidad
