Taurus ACCENTO LATTE Instrucciones De Uso página 16

MILK FROTHER (K)
• Open the coffee outlet cover and make sure the milk
frother is installed well in place.
• If the milk frother is installed well in place, please close
the coffee outlet cover and then insert the connecting
tube.
• Insert the other end of the connecting tube into the de-
tachable milk tank.
DETACHABLE MILK TANK (M)
• It is important to follow this instructions if you want to use
the latte, milk froth or cappuccino functions:
- Move the milk tube from its space in the lid and then
insert one end into the detachable milk tank lid hole.
- Insert the milk tube into the hole of the milk frother at
the side of the coffee outlet.
- Install the detachable milk tank and its lid well in
place.
- The milk tube can be folded. Install it firmly by yourself
if it is loose.
- Also, ensure once connected that the milk tube is not
cramped.
GRIND SETTING KNOB (D)
• Turn the grind setting knob bracket counterclockwise.
• Cover the grind setting knob according to the specified
position.
• Select the grinding setting clockwise.
NOTE: When the new coffee machine is used for the first
time, it is suggested that the grind setting higher than
setting 8 shall be selected. The adjustable grind settings
range between 1 (finest) and 15 (coarsest). The number
on the grind setting knob pointed by the arrow is the
actually selected grind setting.
CAUTION: We suggest adjusting one notch at one time
to avoid damage.
CAUTION: Once the grinder has been filled with coffee,
it's important if you want to adjust the grind setting, you
will need to do it when the grinder is in operation.
COFFEE OUTLET (J)
• The adjustable height of the coffee outlet ranges between
85 and 115 mm, with the base properly fitted.
COFFEE BREWER (F)
• Open the door and check whether the coffee brewer is
installed well in place.
• Check whether the arrow of the coffee brewer is aligned
with the arrow of the upper bracket.
• An audible click indicates that the assembling of the
brewer is correct.
• The warning indicator (2.4) will light solidly if the brewer is
not installed in place.
• Close the door.
• The whole door and body are on the same horizontal
plane.
• The warning indicator (2.4) will flash if the door is not
closed properly.
INNER DRIP TRAY AND RESIDUE-COLLECTION
CONTAINER
• Open the door and check whether the drip tray is installed
in place.
• Open the door and check whether the residue-collection
container is installed in place.
• If the inner drip tray will not be installed well in place, the
warning indicator (2.4) will flash, and the machine can not
work if there is a foreign object at the front of the resi-
due-collection container.
DRIP COVER
• Place the drip cover on the drip tray. The drip cover must
be installed well in place so that the container can be
placed on it to hold coffee, milk, or hot water.
• Insert the drip tray into the appliance.
NOTE: The drip tray collects the water from the dispens-
ing spout during each rinse & self-cleaning, as well as
coffee that might be spilt during brewing. So clean and
empty the drip tray every day.
BEAN TANK
• Fill the bean box with the proper amount of fresh coffee
beans, 200 g at most, and then close the bean box cover.
CAUTION: If the grinding blade is removed, please make
sure that the grinding blade has been installed well in
place before filling the bean box with coffee beans.
CAUTION: Use natural coffee always in order to preserve
the life of the grinding element.
USE
• This appliance is a multifunctional coffee machine. It has
different functions, and we will review them one by one.
NOTE: The appliance will perform cleaning automatically
to make preparation for operation when it is started each
time.
NOTE: The coffee will come out drip by drip at the be-
ginning (2-3 seconds after the brewing is started) and at
the end (6-8 seconds before the brewing is completed)
during the brewing process. This is normal.