Taurus ACCENTO LATTE Instrucciones De Uso página 19

EMPTY THE COFFEE BEANS LEFT
NOTE: This function is used for emptying the beans in
the bean box. Please use it carefully to avoid waste. In
this way, you can ensure to change the coffee beans with
letting minimal residue possible on the grinder and coffee
beans tank.
• Press the bean-emptying button (3). The appliance will
start to conduct the bean-emptying function. At that time,
the indicator of the bean-emptying button (3) illuminates
solidly while other functional indicators turn off.
• Remove the residue-collection container and empty the
ground coffee in it.
• After working, the appliance goes into standby mode
automatically.
• During the function, press the bean-emptying button for at
least 0,3 seconds again if you need to cancel the function.
NOTE: The bean-emptying function only lasts for 15
seconds each time. Please repeat the above operation if
there are many coffee beans left in the bean box.
ENERGY-SAVING MODE
• Press the power switch (1) for at least 0,2 s, and then
the appliance goes into sleep mode. At that time, all the
indicators turn off, and all the functions are invalid.
• The appliance will go into sleep mode if there is not any
operation within 28 minutes. At that time, all the indicators
turn off and all the functions are invalid.
• During sleep mode, press the power switch (1) for at least
0,2 seconds, and then the appliance will conduct a self-
check, preheat and return to standby mode.
NOTE: When the appliance is powered on continuously,
hold and press the power switch (1) for at least 0,2
seconds to activate the appliance after more than 4
hours, and the auto-clean function of the appliance will
be activated.
NOTE: If the appliance is powered off, the auto-clean
function will be activated after holding and pressing the
power switch (1) for at least 0,2 seconds.
NOTE: Please refer to the section «Power on, rinse and
preheat functions» for details.
SET THE COFFEE-DISPENSING AMOUNT AND MILK-
DISPENSING AMOUNT
OPERATION FOR SETTING THE COFFEE-DISPENSING
AMOUNT:
• When the coffee dispenses from the appliance, hold and
press the selected functional key for 2 seconds, the buzz-
er beeps and the corresponding indicator of the selected
functional key flashes.
• The appliance goes into the mode for setting the cof-
fee-dispensing amount. As soon as the coffee in the cup
reaches the required level, release the selected functional
key, then the appliance stops working, and the newly-set
coffee-dispensing amount is saved.
• The range of coffee-dispensing amounts is as below:
- Single-cup espresso: 30-100 ml
- Double-cup espresso: 30-100 ml (x 2 times)
- Americano: 110-180 ml
OPERATION FOR SETTING THE MILK-DISPENSING
AMOUNT:
• When the milk dispenses from the appliance, hold and
press the selected functional key for 2 seconds. The
buzzer beeps, and the corresponding indicator of selected
functional key flashes.
• The appliance goes into the mode for setting the milk-dis-
pensing amount. As soon as the milk in the cup reaches
the required level, release the selected function key. The
appliance stops working, and the newly-set milk-dispens-
ing amount is saved.
• The operation for setting the milk-dispensing amount is
only applicable for the functions of cappuccino and Latte.
• And the range of milk-dispensing amounts is as below:
- cappuccino: Coffee: 30-100 ml + Milk: 10-40 seconds
- Latte: Coffee: 30-100 ml + Milk: 10-40 seconds
FACTORY RESET
• Hold and press the single-cup espresso (4.8) and dou-
ble-cup espresso (4.7) for 2 seconds at the same time.
Then all the parameters are recovered to the factory
default setting.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Unplug the appliance from the mains.
SAFETY THERMAL PROTECTOR
• The appliance has a safety device which protects the
appliance from overheating.
• When the appliance switches itself on and off repeatedly,
for reasons other than the thermostat control, check to
ensure that there are no obstacles that impede correct air
entry or expulsion.
• If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply and wait
for approximately 15 minutes before reconnecting. If the
machine does not start again, seek authorised technical
assistance.