Publicidad
Idiomas disponibles
Idiomas disponibles
Auxiliary Handle
(Fig. 6)
The tool must be supported with the auxiliary
handle 15, which can be swiveled 360˚.
To reposition and/or swivel the handle, loosen
the hand grip, move the handle to the desired
position along the barrel and securely retighten
the hand grip (Fig. 6).
Depth Gauge
(Fig. 7)
Your drilling depth can be pre-set and/or repeat-
ed by using the depth gauge.
Setting depth: After the auxiliary handle is in-
stalled, make sure the accessory has been fully
inserted into the tool holder 2 before setting the
depth gauge 16 (Fig. 7).
To adjust depth, push the depth gauge release
button 14, slide the depth gauge 16 to desired
depth and release pressure on button to lock
the depth gauge in place.
160992A7BZ GBH18V-22 20230316.indd 13
page heading
Assembly
Fig. 6
Fig. 7
-13-
(15)
(16)
(2)
(14)
3/16/23 9:33 AM
Publicidad
