Publicidad
Idiomas disponibles
Idiomas disponibles
GFCI and personal protection devices like elec-
trician's rubber gloves and footwear will further
enhance your personal safety.
Do not use AC only rated tools with a DC power
supply. While the tool may appear to work, the
electrical components of the AC rated tool are
likely to fail and create a hazard to the operator.
Keep handles dry, clean and free from oil and
grease. Slippery hands cannot safely control the
power tool.
Develop a periodic maintenance schedule for
your tool. When cleaning a tool be careful not
to disassemble any portion of the tool since
internal wires may be misplaced or pinched or
safety guard return springs may be improperly
mounted. Certain cleaning agents such as gaso-
line, carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Ensure the switch is in the off position before
inserting battery pack. Inserting the battery
Model Number
Voltage rating
Shank style
Maximum Drilling Diameter in:
Concrete
Steel
Permitted battery temperature during charging
Permitted ambient temperature during operation and storage
Recommended ambient temperature during charging
Please refer to the battery/charger list, included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
The power tool is intended for hammer drill-
ing in concrete, brick and stone, as well as for
light chiselling work. It is also suitable for drill-
ing without impact in wood, metal, ceramic and
160992A7BZ GBH18V-22 20230316.indd 6
Additional Safety Warnings
page heading
pack into power tools that have the switch on
invites accidents.
drilling, and other construction activities con-
tains chemicals known to cause cancer, birth
defects or other reproductive harm. Some ex-
amples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
• Arsenic and chromium from chemically-treat-
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To re-
duce your exposure to these chemicals: work in
a well ventilated area, and work with approved
safety equipment, such as those dust masks
that are specially designed to filter out micro-
scopic particles.
Specifications
Battery Packs / Chargers:
Intended Use
plastic. Power tools with electronic control and
right/left rotation are also suitable for screw-
driving.
-6-
Some dust created by power
sanding, sawing, grinding,
other masonry products, and
ed lumber.
+32...+113°F (0...+45°C)
-4...+122°F (-20...+50°C)
+32...+95°F (0...+35°C)
GBH18V-22
18 V
SDS-plus®
3/4" (19mm)
1/2" (13mm)
3/16/23 9:33 AM
Publicidad
